Green Programming Dongle For Toyota Including G and H Keys (ADD KEY ONLY)

With all doors closed, insert the original key into the ignition and turn the key on and then insert the device into the OBD2 port. Device should sound twice to indicate start of sequence. Device will beep several times followed by the illumination of the anti-theft light. Once anti-theft light is on, remove the original key (anti-theft light will flash). Insert the new key into the ignition without turning the key on. Anti-theft light will go off when key is programmed.

Toyota add remote (switch set to right on device):

With all doors closed, insert the original key into the ignition and turn the key on and then insert the device into the OBD2 port. Device should sound to indicate start of sequence. Open the drivers door once the device beeps several times. The device will start constant sound notification, press lock and unlock at the same time, then press the lock key.